Existing Customers Call 626-359-4550 Or Visit Customer Care
Yes, our systems are perfect for pharmaceutical and biotech cleanrooms where precise humidity control is a must. We offer an energy-efficient, reliable humidification solution that meets industry requirements for sustainability and environmental control, without the need for steam boilers. Our systems meet strict standards for cleanroom humidity in these critical sectors.
Switching to our central humidification system typically leads to a faster ROI due to reduced energy consumption and lower maintenance costs. Facilities like Danfoss Power Electronics saw payback in less than two years, with a tenfold reduction in energy use. Beyond financial savings, our cleanroom humidifiers also improve reliability, reduce operational risks, and eliminate the need for gas-fired boilers.
MeeFog’s cleanroom fogger uses overhead fogging nozzles connected to a central high-pressure pump, operating at around 1,000 psi. This system creates ultra-fine, evenly distributed droplets that evaporate quickly, providing uniform cleanroom humidity control across the facility. By avoiding localized steam injection, it prevents humidity hotspots or dry zones and maintains consistent humidity levels.
Our cleanroom humidity control systems offer significant energy savings compared to their traditional gas-fired counterparts. For instance, at Danfoss Power Electronics, annual humidification costs dropped from $8,000 in gas and electricity to just $750 in electricity. That’s more than a 90% reduction in energy costs, while maintaining superior performance.
Traditional gas-fired steam systems often consume excessive energy and struggle to maintain even cleanroom humidity. In contrast, our central humidification system uses no natural gas, providing consistent humidity levels throughout the facility.
For instance, at Danfoss Power Electronics in Illinois, one MeeFog cleanroom humidifier replaced an inefficient gas-fired system, eliminating humidity fluctuations while dramatically reducing energy use.
In electronics manufacturing, controlling cleanroom humidity is critical to prevent electrostatic discharge (ESD) that can damage sensitive components. Maintaining stable humidity levels helps follow ISO cleanroom standards, prevents contamination, and protects product quality.
Our cleanroom humidifier systems offer precise and reliable humidity control, keeping temperature and humidity settings within a tight range of ±1% RH.
Japanese Power Company Generates 123 MW Boost – 6 x MHPS 501J GTs
Victoria Texas 501F Generates 24 MW Boost – 1 x M501F GT
M701F Gas Turbine Gains 60 MW Total Power Boost
Midland Cogen 144 Total MW Boost – 12 x ABB 11NM GTs
Midlothian & Hays 124 MW Boost – 10 x Alstom 24 GTs
JFE Steel Japan gain 38 MW – 1 x GE/Alstom GT-26
Evaporative Cooling & Wet Compression Boosts Power Output by 30 MW
Vietnam Electricty Gains 39.6 MW Boost – 2 x Siemens V94.2 GTs
Boost of 28 MW on two Siemens SGT-5000FD2 GTs Using Wet Compression
Southwestern US Wet Compression on two 501FD2 GTs
PetroVietnam Generates 30 MW Boost – 2 x GT13E2 GTs
Total 48 MW Boost in Australia – 12 x GE 5371PA GTs
US Power Plant 20 MW Boost – 2 GE 7F.03 GTs
14.5 MW Boost with MeeFog Low-Maintenance Fogging System in Wisconsin
Thai Cogeneration Company Gains 8.6 MW on 2 GE 6561B GTs
APR Energy 16 MW Boost – 4 x FT8 Mobile Pack GTs
Linden Cogen 6 MW Boost – 1 x GE 7EA GT
OEM Systems Replaced with MeeFog – 2 x GE 7FB.04 GTs
Proctor & Gamble 3 MW Boost – 1 x LM6000 GT
Pitchess Detention Center Cogen Gains 8.6 MW – 1 x LM-2500 GT
Texas Plant Gains 2.6 MW – 1 x LM-2500 GT
Offshore Re-Injection Well Gains 1 MW on RB211G
Certified Research Lab Evaporative Cooling for LEED Platinum
GT Fog Cooling Case Study at Petro-China Compressor Station
GT Power Augmentation Case Study – Mexican Power Plant (64 MW)
28 MW Boost on two Siemens SGT-5000FD2 GTs Using Wet Compression
20 MW of Power Recovery at Load-Following Power Plant
10 MW Output Boost at Watson Cogeneration
Refinery Fog Cooling Case Study – Southern California (5 MW, 30 °F Cooling)
Cogeneration Boost Case Study – Las Vegas Cogen (5 MW Output Gain)
4 MW Gains by Adding Overspray to Existing Fog System
Midland Cogeneration Venture Achieves Rapid ROI Across 12 Turbines
Data Center Pre‑Cooling Case Study – NYC Financial Institution (Avoids Shutdowns)
NCAR Multi-Million-Dollar Supercomputer Protected with MeeFog
Meta Hyperscale Data Center Achieves 1.06 PUE with MeeFog Data Center Cooling
Data Center Humidification Case Study – OneNeck IT Solutions, Wisconsin
Humidification ROI Case Study – Housing & Urban Development Upgrade
Electronics Manufacturing Humidification Case Study – Danfoss Power Electronics, Illinois
$26k Annual Savings and Enhanced Air Quality at Upper Peninsula Medical Center
Humidification Case Study – Grand River Hospital, Ontario (Air Quality & Energy Efficiency)
Industrial Humidification Case Study – Alliant Energy Corp (Efficiency Boost)
57% Energy Savings for NC Museum of Art with MeeFog Adiabatic Humidification System
MOCA Los Angeles Preserves Art with MeeFog Humidification Upgrade
Smithsonian Lowers Energy Costs with MeeFog Humidification System
Milwaukee Print Facility Saves $75K/Year Replacing Gas-to-Steam Humidifiers
Grand Valley University Achieves 38% Lower Energy Usage than Baseline ASHRAE Standards
Lower Energy Costs For Dixie Cup Manufacturing with MeeFog
Winery Humidification Case Study: Jamieson Ranch Vineyards, Napa Valley
Winery Barrel Room Humidification Case Study – Silver Oak Cellars
Laboratory Humidification Case Study – Virginia DCLS Facility, Richmond
Army Research Lab Saves $127k with MeeFog Humidification
Iowa State University Chemistry Laboratory Cuts Energy Use in Half
Steam Turbine Pre‑Cooling Case Study – Power Plant (Backpressure Reduction)
Magnets USA Optimizes Production Process with Humidification and Water Treatment from MeeFog
Power Plant in the Middle East Achieves Ultra-Pure Water (< 0.1 µS/cm)
Special Effects Fog Sculpture Case Study – Exploratorium, San Francisco (Fog Bridge Installation)
MeeFog Nozzle Data Sheet
MeeFog Stainless Steel Pump Rack: Model Mee-3-SS
MeeFog Brass Pump Rack: Model Mee-3-BR
MeeFog Low Flow Pump Rack: Model Mini-Mee
MeeFog Staging Valve Panel
MeeFog Zone Valve Panel
MeeFog Humidity Controller
MeeFog Wet Compression Pump Skids
Mee-3 Reverse Osmosis + Fog Pump Combination Skid