Existing Customers Call 626-359-4550 Or Visit Customer Care
A turbine is likely a very good candidate for wet compression if it operates in conditions above 45°F and has a high pressure ratio. For a customized power recovery analysis of your specific site and turbine, please contact the Mee Industries expert team.
Yes, many facilities upgrade their existing MeeFog inlet cooling system to include wet compression for additional output, like the Eagle Point Power Generation (EPPG) facility in Westville.
When correctly implemented, wet compression in a gas turbine operates safely without shortening equipment life.
Injecting a 2% air mass flow as wet compression spray will boost gas turbine output by as much as 10%. The power increase is greater for turbines with a higher pressure ratio.
It reduces compressor work, freeing more shaft power for useful output, and cools the compressor discharge so additional fuel can be burned and further increasing turbine power.
Wet compression is a gas turbine power augmentation method that injects atomized water (fog) into the compressor. The fog evaporates giving an intercooling effect, which reduces the work of compression and increases available power, further boosted by allowing more fuel to be burned due to cooler discharge air.
We guarantee the amount of cooling a system will produce on a hot day. MeeFog systems have a 12-month warranty. Longer warranty terms are available on request.
MeeFog pre-cooling systems can be used whenever the temperature is above freezing. It is usually possible to cool by at least 10°F (5.5°C) even on humid afternoons in a tropical climate.
Yes, we’ve documented several indirect evaporative cooling projects showing measurable performance gains on steam condensers, AC condensers, and other systems.