Existing Customers Call 626-359-4550 Or Visit Customer Care
Our system operates with very small droplet sizes and precise nozzle placement, so water fully evaporates before reaching sensitive equipment. This design protects turbine blades, condenser tubes, and cooling fans from free water.
By lowering condenser inlet temperature, a MeeFog pre-cooling system can increase turbine output, improve heat rate, and reduce fuel consumption per MWh. Many plants see strong gains during hot and dry periods when condenser performance limits capacity. Actual results depend on your site conditions, existing condenser design, and control strategy.
Our upstream gas turbine inlet fogging system uses high-pressure MeeFog nozzles to inject ultra-fine water droplets into the air stream ahead of the gas turbine compressor. The droplets evaporate before the compressor, which cools and densifies the inlet air. That increases the gas turbine power output.
It is designed with industrial-quality components for long service life. The CloudMaker is a portable system that brings professional fogging technology into a compact, user-friendly format.
Yes, the CloudMaker is built as a portable unit with a multi-nozzle sprayer and a 50-foot hose. That makes it easier to move the effect where you want it instead of designing around a fixed installation.
Each MeeFog nozzle is made from type 316 stainless steel and uses a precision 0.006-inch (150 micrometer) orifice. At 2,000 psi, it produces an average droplet size below 10 micrometers for fast evaporation and impressive visual effects.
Smaller droplets have more surface area relative to their size, so they evaporate faster. That helps the CloudMaker create a strong visual plume while supporting cleaner, more efficient fog performance.
The effect comes from very small droplets produced at high pressure. The pump operates at 2,000 psi, and the fine droplets form a broad, visible cloud that looks full and natural.
The system is made for quick setup. It connects to a standard garden hose and plugs into a 120V wall outlet, so it is simple to get running without a complicated installation.